![](https://blog.italonceramica.ru/wp/wp-content/uploads/2021/04/top-maxiformat-logistika.jpg)
120×278 Maxi-Format: Packaging and Transportation
Large format porcelain stoneware is one of the hottest trends in interior design. Maxi-formats, which are already available in the Italon range, are entering the forefront of modern architecture. Such porcelain stoneware is increasingly replacing wallpaper and is found in the interior of bedrooms or living rooms.
Please note that the specifics of working with the 120×278 maxi-format should be discussed at the stage of the design project. It is important to take into account all the steps that affect the installation quality and the final result . For example, the availability of the necessary space for maneuvering and tile treatment, the specialized tools for proper transfer and storage. And it is also very important to hire highly qualified professionals who have experience working with this format.
Together with MAPEI RUSSIA and the professional tile layers @instabur.pro and @masterplitka, we have prepared a number of recommendations for working with 120×278 large-format slabs. In this article we will tell you about the specifics of transporting them.
PACKAGING AND TRANSPORTATION
Let us share with you certain important rules that must be observed at all stages of working with maxi-format tiles.
Before you start working, it is very important to make sure that there is sufficient working space to maneuver the porcelain stoneware. For working with the maxi-formats, always hire highly qualified professionals who can guarantee a flawless result.
The weight of one 120×278 tile is more than 50 kg, so at least 2 people are required to move the tile. During transportation, avoid deformation of the tile: do not twist it and bend it, since this can cause microcracks in the body of the tile.
As a first step, you need to visually check the integrity of the packaging and tiles. Next, you need to wipe the surface with a damp cloth to remove dust and protective wax. For transportation, it is recommended to use specialized carriers with vacuum suction cups. Be sure to constantly monitor the working pressure in them. If maneuvering is carried out indoors, the corners of the slab must be covered with special corner guards that will protect them from damage.
Before starting to work with a tile, be sure to check the markings: tone, grade, and caliber. After unpacking, it is necessary to provide the correct storage place.
You can place tiles in this manner:
- Using specialized tables,
- In a pyramid;
- Along the wall on the longer side of the tile, on a shock absorber joint.
If you want to know all the specifics of working with slabs, be sure to check out the Maxi-format page, where we have collected all the most important recommendations for a perfect result.